TVD’s On the Record
with Masterdisk’s
Scott Hull

Mastering—transferring a recording to its final physical format—is literally the last artistic piece of a long process and one TVD is delving into over the coming months from a variety of angles with Scott Hull, mastering engineer and the owner of world-class and world-famous Masterdisk studios in New York City

Scott will be presenting a master class in mastering, from the fundamentals to the final product, as we count down to Record Store Day 2011 when a select few of you will be given the opportunity to win a personal tour of the record mastering process at Masterdisk.

Onward to Week #5—with sound samples!

What is the RIAA curve? | The Recording Industry Association of America developed a standard playback equalization curve and required that all LP records and record players manufactured conform to this standard.

You have probably noticed that you cannot take the audio plugs from your turntable and plug them into an ordinary line input connection on your preamp. Well, you can, but it sounds horrible. The line input connections, designed for tape machines and CD players, do not have the RIAA curve. Every phono pre-amp must have this playback equalization built into it. Since most of you are probably not audio engineers, I’ll try to describe this curve by explaining why it was used.

If you were to cut an ordinary audio source (without the RIAA EQ) into a lacquer at a reasonably hot level you would notice two things. First the bass frequencies, with their long wavelengths, are so big and loud that they cause the grove to make really large squiggles. So large in fact that it would be hard for a cartridge to playback the squiggles. These very large cut grooves would take up a huge amount of space on the disk and limit your playing time to only a few minutes on a 12″ LP side.

The second thing you would notice is that records are noisy. Yeah I know, you already know that. But I mean a vinyl record is REALLY noisy. That audio source played back without the EQ would be mostly scratchy noise and clicks like you’ve heard from an Edison cylinder. The only way the LP works to make pleasing realistic music is for the audio to be pre-EQ’d so that the bass is reduced dramatically, by 20dB, and the treble is increased dramatically, also by 20dB. The original music returns when the opposite EQ is applied by the phono preamp.

See the picture above — this is the playback curve when the bass is boosted back up 20dB and the high frequencies are rolled off. The reduction in bass helps us get the 20 plus minutes per side and the exaggerated treble works as a very effective noise reduction. You see, the audio had it’s treble boosted before it was cut. Then surface noise from the vinyl was introduced on playback. When played back through the complementary filter, the hi end is cut and the surface noise is reduced but the audio returns to it’s original frequency response. Like magic. The resulting bass response of the LP was better than a 78 too – by a lot. And the noise floor was improved.

So that’s why an equalization curve was developed, and why the RIAA standardized it. For more info on this standard see here.

But even that’s not the end of the story. The big treble boost puts extreme stress on the cutting amplifiers; so much so that specially built circuit breakers need to be inline at all times to avoid damaging the (very expensive) cutter head. This high frequency emphasis also causes bright instruments like cymbals and vocals to distort if cut without care.

Listen to this quick before and after. It’s a sample of a track by the artist Danni (produced by Nik Fairclough).


 
Bold (normal) by Masterdisk-NYC


 
Bold (with RIAA curve applied) by Masterdisk-NYC

These quick samples of music are first played normally, and then with the RIAA EQ applied. You will immediately notice the almost painfully shrill top end and dramatic loss of bass from the RIAA filter. It was never intended that the end user ever hear the RIAA encoded signal — a good thing, because it sounds terrible. This example illustrates just how much the music has to be pre-emphasized to effectively reduce the surface noise of the disk.

That’s it for my crash course on the vinyl groove and the RIAA curve. On to more aspects of vinyl next week!

Scott Hull is a mastering engineer and the owner of Masterdisk (founded in 1973) in New York City. In his 25-plus year career, Scott has mastered records for Sting, Bob Dylan, Steely Dan, Os Mutantes, John Zorn, Uncle Tupelo, Sharon Jones & The Dap Kings and hundreds more. Visit Masterdisk online or on Facebook.

This entry was posted in The TVD Storefront. Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • SUPPORTING YOUR LOCAL INDIE SHOPS SINCE 2007


  • Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text
  • Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text Alternative Text